Products

ASTM A615 is a deformed steel standard categorized under American standards. These are generally available in diameter between 9.5 mm and 43 mm, and length between 6 m and 12 m. Generally, the steel bars that fall under this standard are under deformed or plain carbon steel.

HRB600 steel bar is a new type of hot-rolled ribbed steel bar with high strength and good ductility. The use of HRB600 steel bar in engineering presents advantages such as saving steel bar usage and facilitating steel bar layout.

HRB500 steel reinforcement refers to a commonly used steel material in concrete structures, which has certain strength and toughness, and can effectively enhance the bearing capacity and tensile performance of concrete. Steel reinforcement plays an important role in construction.

HRB400 is a steel reinforcement material with high strength and good plasticity. HR stands for "hot rolling", which essentially refers to the heating and rolling process of steel bars in the production process. B represents that its yield strength is 400 megapascals (MPa) higher than that of ordinary carbon steel. HRB400 steel bars are mainly composed of alloys of carbon, sulfur, phosphorus, manganese and other elements, which have weather resistance, corrosion resistance and high tensile strength.

Galvanized reinforcing steel is bare reinforcing steel coated with a protective layer of zinc metal. The zinc coating serves as a barrier to corrosive elements that the rebar is exposed to when embedded in concrete.

ASTM A615 is a deformed steel standard categorized under American standards. These are generally available in diameter between 9.5 mm and 43 mm, and length between 6 m and 12 m. Generally, the steel bars that fall under this standard are under deformed or plain carbon steel.

A615 grade 40 steel adds the most benefit when building materials must hold concrete in compression. Strength is one of the differentiators for these two rebar grades. The minimum tensile strength for A615 grade 40 steel is 70.05 ksi. It has a minimum yield strength of 40 ksi.

ASTM A615 is a deformed steel standard categorized under American standards. These are generally available in diameter between 9.5 mm and 43 mm, and length between 6 m and 12 m. Generally, the steel bars that fall under this standard are under deformed or plain carbon steel.

TMT means Thermo Mechanical Treatment, which is a thermomechanical process; These TMT steel bars are generally used material in construction for enhanced protection against earthquake and another type of natural disasters. To ensure safety for your structure, TMT steel bars should be resistant to corrosion which helps to obtain a longer life to your structure.

Deformed bar, also known as rebar (short for reinforcing bar), is a steel bar or mesh of steel wires used as tension devices in reinforced concrete and reinforced masonry structures to strengthen and hold the concrete in tension. Deformed bar’s surface is often patterned to form a better bond with the concrete.